GHANI DIAG

TUTORIAL FOR RLINK 2 UPDATE

€3

TUTORIAL FOR RLINK 2 UPDATE

Compatible cars: all the Renault cars with RLink 2 and 7” or 8,7” display

 AVAILABLE UPDATES


Screenshot_4.png

                                                   *versions 2.2.15.703 and 3.3.15.41x are NOT updatable manually but only at the Renault workshop

CARPLAY AND ANDROID AUTO ACTIVATION
Screenshot_5.png
                                                   *CarPlay and Android Auto are on half screen on 3.3 and 7.0. Full screen only on 8.0 and 9.0
DON’T UPDATE FROM 2.2/3.3 TO 7.0 OR LATER MANUALLY BECAUSE THE SYSTEM WILL NO LONGER 
WORK CORRECTLY. This is possible only in the Renault workshop because the boot file will also be updated.
This is essential for correct operation and not possible in other ways. Do each procedure at your own risk, 
in the event of a system failure you will have to replace the RLink in the workshop.

------------------------------------------------------------------------------------------------------------------------------------------------
Update procedure valid for ALL versions
-Avoid jumping from 7.0 to 9.0 but follow the serial order like from 7.0 to 8.0 and after 9.0
-Download the update file from the links below and unpack it (file in .lgu format)
-Format an USB stick from 8Gb to 32Gb in FAT32, create an R-LINK folder and put the update files inside.
Flash drives larger than 32Gb will not be recognized.
- Car engine on, disconnect any BT phone and remove any other SD or USB card present.
-Insert the USB stick and press update in the message that appears on the screen. The system reboots a 
couple of times and installs everything by itself. The last restart takes about 45 seconds. DO NOT TURN OFF 
THE CAR AND DO NOT REMOVE THE USB KEY UNTIL THE SCREEN REBOOTS AND SWITCH ON.

------------------------------------------------------------------------------------------------------------------------------------------------------------------------

UPDATE FROM 2.2.x TO 3.3.16.98x
Also valid for updating from 3.3.16.94x/3.3.16.96x to 3.3.16.98x 

-----------------------------------------------------------------------------------------------------------------------------------------------------------------------

UPDATE FORM 7.0.24.1xx TO 8.0.32.50x

----------------------------------------------------------------------------------------------------------------------------------------------------------------------

UPDATE FROM 8.0.32.x/9.0.33.43X TO 9.0.34.61x

------------------------------------------------------------------------------------------------------------------------------------------------------------------------

RESTORE FROM 3.3.16.x TO 2.2.19.300
Must be performed if you have updated from 2.2 to 3.3 manually and now you want to have the 
system updated in the workshop to 7.0 If you do not go back to the native version of your system 
it will not be possible to update it in the workshop.

Recently viewed